NO.40320
This model steam engine is composed completely of machined and milled pieces. Largest attention was put on an assembly easy for steam beginners. The cylinders are manufactured from brass castings made specifically for it. In place of a heavy casting base, we selected a fabricated assembly from two milling plates and spacer pins. This construction makes large weight savings possible. The cylinder units are installed on a separate plate, which are connected again by four columns with the basic construction. A crosshead leads the piston rod. An angle, to slidegate valve-cock-brought, holds the alignment. The crankshaft compound from axles with splines and crankcheeks in milled execution
. That is connected whole with set-screws, which press on the taper gibs.
This model machine is supplied as twin cylinder prefabricated construction set inclusive reversal.
Prefabricated construction set means:
All parts are finished worked on, milled, turned and bored, and thread, however unlacquered. The kit contains all parts, all screws in fine hexagonal execution, a building guidance and tool. On the part of the customers only tools and aids are needed, which are present in each household nowadays.
The machine is suitable outstanding as ship machine.
boiler e.g. lying: NR. 50630 and 50640
or stehkessel: 50220 and 50320
Been suitable for ships to 30kg water displacement and screws to 90mm.
Technical data:
Drilling 14 mm
Stroke 18 mm
Weight 1250 g without flywheel
Flywheel 90 mm
Height of 138 mm
Width 63 mm
Length 150 mm
